Filling nozzles for Acid Fillers

To the Kallstrom acid fillers we have developed a wide range filling nozzles and sealings to fit different types of batteries; both VRLA and flooded. ?For the machines with flexible nozzles the filling nozzles are fitted with a bayonet fitting and are easy to exchange. ?For the VRLA fillers with fixed filling head the nozzles […]

Semi-Automatic Machines

For the small factory or the battery depots we offer simple and robust semi-automatic machines for automotive, truck and motor cycle batteries. The filling is made by vacuum and each cell is filled to a specific level. The vacuum can be achieved with either a air driven ejector or electrical vacuum pump. There are basically […]

Automatic Filling Machines

There are two ways to fill the battery either to specific level or to a specific volume. The filling process is either pressure aided or vacuum aided Based on this Källström offers three types of automatic machines see table below? Acid Filler SF4-2 Acid Filler SF4-21 Acid Filler S4-4 Level filling yes no yes Volumetric […]

Filling of SLI batteries (flooded)

The most common way to for these batteries nowadays is pressure-aided filling and each cell is either filled to a specific level or a specific volume. However Källström still offers machines that use vacuum-aided filling level filling. ?The level filling machine is typically used for filling before and after formation (top-up leveling). The volumetric filler […]

Filling of gel batteries and mixing of gel

Due to the different designs of gel batteries different type of fillers are suitable. A gel battery must sometimes be filled with vacuum and requires a specific volume/weight in each cell, which is similar to AGM battery. In other cases a gel battery can be filled by pressure/gravity and requires a specific level in each […]

Acid Filler SF4-8T (Triple)

The SF4-8T is a Triple headed machine that fills VRLA batteries according to the vacuum principle with a pre-selected mass or volume per cell.? The machine consists of a stand with one inlet and one outlet belt conveyor, a measuring unit and a filling unit. A tank is placed at the bottom of the stand […]

Acid Filler SF4-8D (Double)

SF4-8D fills AGM batteries according to the vacuum principle with a preselected mass or volume per cell. The machine consists of a stand with a 1500 mm belt conveyor, a measuring unit and filling unit. A tank equipped with a pump, valves and level control is placed at the bottom of the stand. ?The filling […]

Acid Filler SF4-8S (Single)

SF4-8S fills AGM batteries according to the vacuum principle with a preselected mass or volume per cell. The machine consists of a stand with a 1500 mm belt conveyor, a measuring unit and filling unit. A tank equipped with a pump, valves and level control is placed at the bottom of the stand. ?The filling […]

  • 1
  • 2

BITRODE PARTIAL USER'S LIST

SOVEMA PARTIAL USER'S LIST

TRIOPTICS PARTIAL USER'S LIST

XENOCS PARTIAL USER'S LIST

KALLSTROM PARTIAL USER'S LIST

OXFORD PARTIAL USER'S LIST

HASKRIS PARTIAL USER'S LIST

VINKAROLA PARTIAL USER'S LIST