There are two ways to fill the battery either to specific level or to a specific volume. The filling process is either pressure aided or vacuum aided Based on this Källström offers three types of automatic machines see table below? Acid Filler SF4-2 Acid Filler SF4-21 Acid Filler S4-4 Level filling yes no yes Volumetric […]

The most common way to for these batteries nowadays is pressure-aided filling and each cell is either filled to a specific level or a specific volume. However Källström still offers machines that use vacuum-aided filling level filling. ?The level filling machine is typically used for filling before and after formation (top-up leveling). The volumetric filler […]

Due to the different designs of gel batteries different type of fillers are suitable. A gel battery must sometimes be filled with vacuum and requires a specific volume/weight in each cell, which is similar to AGM battery. In other cases a gel battery can be filled by pressure/gravity and requires a specific level in each […]

The SF4-8T is a Triple headed machine that fills VRLA batteries according to the vacuum principle with a pre-selected mass or volume per cell.? The machine consists of a stand with one inlet and one outlet belt conveyor, a measuring unit and a filling unit. A tank is placed at the bottom of the stand […]

SF4-8D fills AGM batteries according to the vacuum principle with a preselected mass or volume per cell. The machine consists of a stand with a 1500 mm belt conveyor, a measuring unit and filling unit. A tank equipped with a pump, valves and level control is placed at the bottom of the stand. ?The filling […]

SF4-8S fills AGM batteries according to the vacuum principle with a preselected mass or volume per cell. The machine consists of a stand with a 1500 mm belt conveyor, a measuring unit and filling unit. A tank equipped with a pump, valves and level control is placed at the bottom of the stand. ?The filling […]